In-situ Studies with Photons, Neutrons and Electrons Scattering

In-situ scattering and diffraction measurements using synchrotron and neutron beam lines have become a viable tool to look at the non-equilibrium processing of advanced materials. This volume presents the subject from the theoretical and experimental standpoint, in order to provide a closer insight...

Volledige beschrijving

Bewaard in:
Bibliografische gegevens
Andere auteurs: Kannengiesser, Thomas (Redacteur), Babu, Sudarsanam Suresh (Redacteur), Komizo, Yu-Ichi (Redacteur), Ramirez, Antonio J. (Redacteur)
Formaat: Livre numérique
Taal:Anglais
Gepubliceerd in: Berlin, Heidelberg : Springer Berlin Heidelberg : Imprint: Springer [20..].
Cham : Springer Nature
Onderwerpen:
Online toegang:Accès sur la plateforme de l'éditeur
Accès sur la plateforme Istex
Accès Université d'Orléans
Accès INSA CVL
Opmerking: Autre contribution Antonio J. Ramirez (éditeur)
Archives Springer e-books (Licence nationale)
Archives Springer e-books (Licence nationale)
Autres localisations: Voir dans le Sudoc
Edition sous un autre format:• In-situ studies with photons, neutrons and electrons scattering, Thomas Kannengiesser... [et al.], editors, Heidelberg, Springer, 2010, 1 vol. (XII-204 p.), 978-3-642-14793-7
LEADER 04179nam a22003617a 4500
001 967860
008 110106q2000 xx ||| |||| 00| 0 eng d
009 PPN149029543
020 |a 9783642147944 
041 0 |a eng 
082 |a 620.16 
245 0 0 |a In-situ Studies with Photons, Neutrons and Electrons Scattering   |c edited by Thomas Kannengiesser, Sudarsanam Suresh Babu, Yu-ichi Komizo, [et al.]. 
260 |a Berlin, Heidelberg :  |b Springer Berlin Heidelberg :  |b Imprint: Springer. 
260 |a Cham :  |b Springer Nature,  |c [20..]. 
500 |a Autre contribution Antonio J. Ramirez (éditeur) 
500 |a Archives Springer e-books (Licence nationale) 
500 |a Archives Springer e-books (Licence nationale) 
505 1 |a In Situ Study of Phase Transformation in Steel During Welding In Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys During Welding Using Synchrotron Radiation In Situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni Cr Fe Alloys Grain Nucleation and Growth of Individual Austenite and Ferrite Grains Studied by 3DXRD Microscopy at the ESRF Direct Analysis of Solidification-Mode During Welding for the Assessment of Hot-Cracking In Situ Synchrotron Study of Inclusions in the Weld Pool for the Assessment of Nucleation Potency of Acicular Ferrite Characterization of Solid State Phase Transformation in Continuously Heated and Cooled Ferritic Weld Metal In Situ Determination of Phase Transformations and Structural Changes During Non-Equilibrium Material Processing In Situ Phase Transformation Studies on a Transformation Induced Plasticity Steel Under Simulated Weld Thermal Cycles Using Synchrotron Diffraction Imaging Fast Processes in Liquid Metal Foams and Semi-Solid Alloys Using Synchrotron Radioscopy with Spatio-Temporal Micro-Resolution In Situ Measurements for Structural Integrity: An Engineer s Perspective In Situ Neutron Diffraction During Thermo-Mechanically Controlled Process for Low Alloy Steels Influence of Plastic Deformation on the Residual Stress Distribution and Fatigue Behaviour of High Strength Steels Welds 
506 |a Accès en ligne pour les établissements français bénéficiaires des licences nationales 
506 |a Accès soumis à abonnement pour tout autre établissement 
506 |a Conditions particulières de réutilisation pour les bénéficiaires des licences nationales. https://www.licencesnationales.fr/springer-nature-ebooks-contrat-licence-ln-2017 
520 |a In-situ scattering and diffraction measurements using synchrotron and neutron beam lines have become a viable tool to look at the non-equilibrium processing of advanced materials. This volume presents the subject from the theoretical and experimental standpoint, in order to provide a closer insight into the different synchrotron and neutron diffraction techniques as well as innovative microscopy techniques. It addresses the following items: - phase detection and quantification - In-situ welding experiments - Stress/strain build-up - model development and Simulation - Analysis tools and programming 
650 |a Physique 
700 1 |a Kannengiesser, Thomas.  |4 edt 
700 1 |a Babu, Sudarsanam Suresh.  |4 edt 
700 1 |a Komizo, Yu-Ichi.  |4 edt 
700 1 |a Ramirez, Antonio J.  |4 edt 
776 0 |0 158591887  |t In-situ studies with photons, neutrons and electrons scattering  |f Thomas Kannengiesser... [et al.], editors  |c Heidelberg  |n Springer  |d 2010  |p 1 vol. (XII-204 p.)  |z 978-3-642-14793-7 
856 4 |q PDF  |u https://doi.org/10.1007/978-3-642-14794-4  |z Accès sur la plateforme de l'éditeur 
856 4 |u https://revue-sommaire.istex.fr/ark:/67375/8Q1-SVJMW5VG-K  |z Accès sur la plateforme Istex 
856 4 |5 452349901:750602015  |u https://ezproxy.univ-orleans.fr/login?url=https://doi.org/10.1007/978-3-642-14794-4  |z Accès Université d'Orléans 
856 4 |5 180339901:753962411  |u https://ezproxy.insa-cvl.fr/login?qurl=https://doi.org/10.1007/978-3-642-14794-4  |z Accès INSA CVL 
997 |0 967860  |1 Livre numérique  |a Ressource numérique  |b INSA  |b ENSA  |c 0/Bibliothèque numérique/  |c 1/Bibliothèque numérique/Autre ressource numérique/